Hyundai Azera: Front Impact Sensor (FIS) Description and Operation
Fifth generation HG (2011–2024) / Hyundai Azera 2011-2024 Service Manual / Restraint / SRSCM / Front Impact Sensor (FIS) Description and Operation
Fifth generation HG (2011–2024) / Hyundai Azera 2011-2024 Service Manual / Restraint / SRSCM / Front Impact Sensor (FIS) Description and Operation
| Description |
The front impact sensor (FIS) is installed in the Front End
Module (FEM). They are remote sensors that detect acceleration due to a
collision at its mounting location. The primary purpose of the Front
Impact Sensor (FIS) is to provide an indication of a collision. The
Front Impact Sensor (FIS) sends acceleration data to the SRSCM.
SRS Control Module (SRSCM) Repair procedures
Removal
1.
Remove the ignition key from the vehicle.
2.
Disconnect the battery negative cable and wait for at least three minutes before beginning work.
3.
Remove the floor console.
(Ref ...
Front Impact Sensor (FIS) Components and Components Location
Components
...
See also:
Special Service Tools
Special Service Tools
Tool (Number and Name)IllustrationUse09546-26000Strut spring compressorCompression of coli spring
...
Components and Components Location
Component Location
1. Windshield wiper arm & blade2. Wiper & washer switch3. Windshield washer hose4. Windshield wiper motor & linkage5. Washer motor6. Washer reservoir7. Wiper relay ...
Side Impact Sensor (SIS) Description and Operation
Description
Side Impact Sensor (SIS) system consists of two Pressure Side
Impact Sensor (P-SIS) which are installed at each center of the front
door module (LH and RH) and two SIS which are ins ...
Categories
Hyundai Azera Manuals
© 2011-2024 Copyright www.hgmanual.com