Replacement |
|
1. |
Remove the front seat assembly.
(Refer to Front Seat - "Front Seat Assembly") |
2. |
Remove the front seat shield outer cover.
(Refer to Front Seat - "Front Seat Shield Outer Cover") |
3. |
Push the lock pin (B), remove the front seat headrest (A). |
4. |
Remove the protector (A). |
5. |
Disconnect the front seat heater connector (A). |
6. |
Push the clips (B) from the front seat back board (A).
|
7. |
After loosening the mounting screws, then remove the air ventilation seat duct (A). |
8. |
Push the protecter (A) by the front seat back frame. |
9. |
Pull out the headrest guides (A) while pinching the end of the guides, and remove them. |
10. |
Remove the front seat back cover (A) from the front seat frame. |
11. |
After removing the velcro tape (A) on the front of seat back and remove the front seat back cover (B). |
12. |
Installation is the reverse of removal.
|
Roof antenna Components and Components Location
Components
...
Engine coolant
The high-pressure cooling system has a reservoir filled with year-round antifreeze
coolant. The reservoir is filled at the factory.
Check the antifreeze protection and coolant level at least once a ...
Water Temperature Control Assembly Repair procedures
Removal and Installation
1.
Remove the radiator upper hose and lower hose.
(Refer to Cooling System - "Radiator Hose")
2.
Disconnect the throttle body water hoses.
(Refer to Fuel System - ...