Hyundai Equus Manuals

Hyundai Azera: Front Seat Belt Pretensioner Repair procedures - Front Seat Belt - Body (Interior and Exterior) - Hyundai Azera 2011-2024 Service ManualHyundai Azera: Front Seat Belt Pretensioner Repair procedures

Replacement
   
When installing the belt, make sure not to damage the pretensioner.
1.
Remove the front seat assembly.
(Refer to Front Seat - "Front Seat Assembly")
2.
Remove the center pillar upper trim.
(Refer to Interior Trim - "Center Pillar Trim")
3.
After loosening the mounting bolt, then remove the front seat belt upper anchor (A).

Tightening torque :
39.2 ~ 53.9 N.m (4.0 ~ 5.5 kgf.m, 28.8 ~ 39.8 lb-ft)

4.
After disconnecting the pretensioner connector lock pin, remove the front seat belt pretensioner connector (A), loosen the mounting bolts, then remove the front seat belt pretensioner (B).

Tightening torque :
39.2 ~ 53.9 N.m (4.0 ~ 5.5 kgf.m, 28.8 ~ 39.8 lb-ft)

5.
Installation is the reverse of removal.
   
Replace any damaged clips.
Make sure the connector is plugged in properly.
Front Seat Belt Pretensioner Components and Components Location
Component Location 1. Front seat belt pretensioner ...

Height Adjust Components and Components Location
Component Location 1. Height adjust ...

See also:

Automatic heating and air conditioning
1. Push the AUTO button. The modes, fan speeds, air intake and air-conditioning will be controlled automatically by setting the temperature. 2. Set the temperature to the desired temperatur ...

Cooling system
Check cooling system components, such as radiator, coolant reservoir, hoses and connections for leakage and damage. Replace any damaged parts. ...

Cluster ionizer Repair procedures
Inspection 1. Press the OFF switch more then 4 times within 2 seconds while pressing the MODE switch. DisplayFail description00Normal50Cluster ionizer fault * Diagnostic procedure refer to D ...

Categories

Hyundai Azera Manuals


© 2011-2024 Copyright www.hgmanual.com