Hyundai Azera: Front Seat Shield Outer Cover Repair procedures

Fifth generation HG (2011–2024) / Hyundai Azera 2011-2024 Service Manual / Body (Interior and Exterior) / Front Seat / Front Seat Shield Outer Cover Repair procedures

Replacement

•	Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.

•	Take care not to bend or scratch the trim and panels.

•	Put on gloves to protect your hands.

1.	Using a screwdriver or remover, remove the front seat shield outer cover (A).

2.	Disconnect the connector (A).

3.

Installation is the reverse of removal.

•	Replace any damaged clips.

•	Make sure the connector is plugged in properly.

Front Seat Shield Outer Cover Components and Components Location

Component Location 1. Front seat shield outer cover ...

Front Seat Shield Inner Cover Components and Components Location

Component Location 1. Front seat shield inner cover ...

See also:

Underdrive Brake Control Solenoid Valve(UD/B_VFS) Specifications
Specifications Direct control VFS[UD/B] ? Control type : Normal low type Control Pressure [kpa (kgf/cm?, psi)] 500.14 ~ 9.81(5.1 ~ 0.1, 72.54 ~ 1.42)Current value(mA)50~850 Internal resis ...

Front Seat Assembly Components and Components Location
Component Location 1. Front seat assembly ...

Oil Pressure Switch Repair procedures
Removal and Installation 1. Remove the water pipe. (Refer to Cooling System - "Water Pipe") 2. Remove the oil pressure switch (A). Tightening torque: 34.3 ~ 44.1N.m (3.5 ~ 4.5kgf.m, 25.3 ...

Categories

Hyundai Azera Manuals

© 2011-2024 Copyright www.hgmanual.com