Replacement |
1. |
Remove the front wheel & tire (A).
|
2. |
Remove the variable damper connector (A) & bracket (B). |
3. |
Remove the wheel speed sensor & bracket (A) from the front strut assembly by loosening bolts. |
4. |
Disconnect the stabilizer link (B) with the front strut assembly (A) after loosening the nut.
|
5. |
Disconnect the front strut assembly (A) with the knuckle by loosening the bolt & nut.
|
6. |
Loosen the strut upper locking nuts (A) and than remove the front strut assembly.
|
7. |
Installation is the reverse of removal. |
Disassembly |
1. |
Under the condition of fixed strut (A) on the SST (09546-26000), remove the front strut self-locking nut (B). |
2. |
Remove the insulator, spring seat, coil spring and dust cover from the strut assembly |
Inspection |
1. |
Check the strut bearing for wear and damage. |
2. |
Check the spring upper and lower seat for damage and deterioration. |
3. |
Compress and extend the piston rod (A) and check that there is no abnormal resistance or unusual sound during operation. |
1. |
Fully extend the piston rod. |
2. |
Drill a hole on the (A) section to remove gas form the cylinder.
|
Cooling system
Check cooling system components, such as radiator, coolant reservoir, hoses and
connections for leakage and damage. Replace any damaged parts. ...
Tilt and telescopic steering
Tilt and telescopic steering allows you to adjust the steering wheel before you
drive.You can also raise it to give your legs more room when you exit and enter
the vehicle.
The steering wheel shoul ...
Map lamp
,
Push the switch (1) to turn the map lamp on or off. This light produces a spot
beam for convenient use as a map lamp at night or as a personal lamp for the driver
and the fro ...