Hyundai Azera: Front Wheel Speed Sensor Repair procedures

Fifth generation HG (2011–2024) / Hyundai Azera 2011-2024 Service Manual / Brake System / ESC(Electronic Stability Control) System / Front Wheel Speed Sensor Repair procedures

Removal

1.

Remove the front wheel and tire.

Tightening torque:

88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft)

2.

Remove the front wheel speed sensor mounting bolt (A).

Tightening torque:

6.9 ~ 10.8 N.m (0.7 ~ 1.1 kgf.m, 5.1 ~ 7.6 lb-ft)

3.	Remove the front wheel guard .

4.	Remove the front wheel speed sensor cable mounting bolt.

5.	Disconnect the front wheel speed sensor connector, then remove the front wheel speed sensor.

6.	Installation is the reverse of removal.

Front Wheel Speed Sensor Components and Components Location

Components 1. Front wheel speed sensor2. Front wheel speed sensor connector ...

Rear Wheel Speed Sensor Components and Components Location

Components 1. Rear wheel speed sensor 2. Rear wheel speed sensor cable ...

See also:

Gasoline containing alcohol and methanol
Gasohol, a mixture of gasoline and ethanol (also known as grain alcohol), and gasoline or gasohol containing methanol (also known as wood alcohol) are being marketed along with or instead of leaded ...

Cluster Fascia Panel Repair procedures
Replacement • When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage. • Take ...

Rocking the vehicle
If it is necessary to rock the vehicle to free it from snow, sand, or mud, first turn the steering wheel right and left to clear the area around your front wheels. Then, shift back and forth between ...

Categories

Hyundai Azera Manuals

© 2011-2024 Copyright www.hgmanual.com