Inspection |
1. |
Open the fuel filler door and remove the fuel filler door release actuator (A) after loosening the mounting bolts. |
2. |
Remove the luggage side trim [LH].
|
3. |
Disconnect the release actuator connector (A). |
4. |
Check for continuity between terminal No.1 and No.2.
If there is no continuity, replace the fuel filler door opener. |
ESCL(Electronic Steering Column Lock) Components and Components Location
Component
...
Manual heating and air conditioning
The heating and cooling system can be controlled manually by pushing buttons
other than the AUTO button. In this case, the system works sequentially according
to the order of buttons selected.
...
Battery Repair procedures
Removal and Installation
1.
Remove the air duct (B).
2.
Disconnect the negative terminal (A) from the battery.
Tightening torque :
3.9 ~ 5.9N.m (0.4 ~ 0.6kgf.m, 2.9 ~ 4.3lb-ft)
3.
D ...