Hyundai Equus Manuals

Hyundai Azera: Fuel Pressure Control Valve (FPCV) Repair procedures - Engine Control System - Engine Control/Fuel System - Hyundai Azera 2011-2024 Service ManualHyundai Azera: Fuel Pressure Control Valve (FPCV) Repair procedures

Inspection
1.
Turn the ignition switch OFF and disconnect the battery negative (-) cable.
2.
Disconnect the fuel pressure regulator valve connector.
3.
Measure resistance between the fuel pressure regulator valve terminals 1 and 2.
4.
Check that the resistance is within the specification.

Specification: Refer to “Specification”

Removal
(Refer to Fuel Delivery System - "High Pressure Fuel Pump")
Installation
(Refer to Fuel Delivery System - "High Pressure Fuel Pump")
Fuel Pressure Control Valve (FPCV) Schematic Diagrams
Circuit Diagram ...

Canister Close Valve (CCV) Description and Operation
Description Canister Close Valve (CCV) is installed on the canister ventilation line. It seals evaporative emission control system by shutting the canister from the atmosphere when leakage dete ...

See also:

Fluid Repair procedures
Service Adjustment Procedure Oil level Check     A check of Automatic Transaxle Fluid(ATF) level is not normally required during scheduled services. If an oil leak is found, ...

Switching to Radio Mode
Pressing the key will change the operating mode in order of FM1 ➟ FM2 ➟ AM ➟ XM1 ➟ XM2 ➟ XM3. If [Mode Pop up] is turned on within [Display], then pressing ...

Shift Lever Repair procedures
Removal 1. Remove the center console assembly. (Refer to Body - "Console") 2. Remove the duct (A). 3. Disconnect sports mode connector (A). 4. Remove the shift cable (B). 5. Remo ...

Categories

Hyundai Azera Manuals


© 2011-2024 Copyright www.hgmanual.com