Removal |
1. |
Remove the fuel pump.
(Refer to Fuel Delivery System - “Fuel Pump”) |
2. |
Disconnect the electric pump wiring connector (A) and the fuel sender connector (B). |
3. |
Remove the cushion pipe fixing clip (A), and then separate the head assembly (B) from reservoir cup. |
4. |
Remove the return nozzle (B) after releasing the fixing hook (A). |
5. |
Remove the reservoir-cup (B) after releasing the fixing hooks (A). |
6. |
Remove the pre-filter (C) after releasing the fixing hooks (A,B)
|
7. |
Remove the fuel pressure regulator (A) in the direction. |
Installation |
1. |
Installation is reverse of removal. |
Windshield washers
In the OFF position, pull the lever gently toward you to spray washer fluid on
the windshield and to run the wipers 1-3 cycles.
Use this function when the windshield is dirty.
The spray and wip ...
Front Seat Back Cover Repair procedures
Replacement
•
Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.
•
Take care not to bend or scratch the trim and pan ...
Compressor Components and Components Location
Components
1. Screw2. Bolt3. Limiter Assembly4. Retainer Ring5. Pulley6. Connector Bracket7. Compressor Assembly
...