Removal |
1. |
Remove the fuel pump.
(Refer to Fuel Delivery System - “Fuel Pump”) |
2. |
Disconnect the electric pump wiring connector (A) and the fuel sender connector (B). |
3. |
Remove the cushion pipe fixing clip (A), and then separate the head assembly (B) from reservoir cup. |
4. |
Remove the return nozzle (B) after releasing the fixing hook (A). |
5. |
Remove the reservoir-cup (B) after releasing the fixing hooks (A). |
6. |
Remove the pre-filter (C) after releasing the fixing hooks (A,B)
|
7. |
Separate the electric pump motor (A) from the fuel filter (B). |
Installation |
1. |
Installation is reverse of removal. |
Power Window Motor Repair procedures
Inspection
Front Power Window Motor Inspection
1.
Remove the front door trim panel.
(Refer to Body - "Front Door Trim")
2.
Disconnect the connector from the motor.
3.
Connect the termina ...
Roof Trim Assembly Repair procedures
Replacement
•
Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.
•
Put on gloves to protect your hands.
1.
Re ...
Rear Body Body Repair
Roof panel rear cornerSide outer panel rear cornerRear package tray trim mounting hole (O12) Side outer panel rear cornerRear combination lamp mounting hole(8.5X8.5) Rear bumper mounting hole (14X ...