Removal |
1. |
Lift the vehicle and support the fuel tank with a jack. |
2. |
Remove the nuts (A) from fuel tank. |
3. |
Disconnect the fuel filler hose (A). |
4. |
Remove the fuel shut off valve (A). |
Installation |
1. |
Installation is reverse of removal.
|
Inspection |
1. |
Visually check if the valve is are deformed or damaged. |
2. |
Check if the valve spring is oprerated normally. |
Main Crash Pad Assembly Repair procedures
Replacement
•
When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply protective tape around the related parts, to
prevent damage.
•
Take ...
Brake hoses and lines
Visually check for proper installation, chafing, cracks, deterioration and any
leakage. Replace any deteriorated or damaged parts immediately. ...
Map lamp
,
Push the switch (1) to turn the map lamp on or off. This light produces a spot
beam for convenient use as a map lamp at night or as a personal lamp for the driver
and the fro ...