Removal |
1. |
Release the residual pressure in fuel line.
(Refer to Fuel Delivery System - “Release Residual Pressure in Fuel Line”) |
2. |
Remove the fuel pump service cover (A) in the trunk. |
3. |
Disconnect the fuel pump connector (A) and the fuel tank pressure sensor connector (B). |
4. |
Disconnect the fuel feed tube quick connector (C). |
5. |
Lift the vehicle and support the fuel tank with a jack. |
6. |
Remove the center muffler assembly.
|
7. |
Disconnect the fuel filler hose (A). |
8. |
Disconnect the vapor hose quick-connector (A). |
9. |
Remove the parking brake line (A). |
10. |
Remove the fuel tank band installation nuts (A). |
11. |
Remove the fuel tank after removing the fuel tank band (A) as below. |
Installation |
1. |
Installation is reverse of removal.
|
Cruise Control Switch Repair procedures
Removal and Installation
1.
Disconnect the battery negative terminal.
Tightening torque :
4.0 ~ 6.0N.m (0.4 ~ 0.6kgf.m, 3.0 ~ 4.4lb-ft)
2.
Remove the steering wheel.
(Refer to Steering ...
Side impact air bag
Your vehicle is equipped with a side impact air bag in each front and outboard
rear seat. The purpose of the air bag is to provide occupants with additional protection
than that offered by the sea ...
AVN Head Unit Repair procedures
Removal
AVN Head Unit
•
Take care not to scratch the center fascia panel and related parts.
•
Eject all the disc before removing the AVN head unit to prevent damagin ...