Hyundai Azera: General Information

Brake System

...

Specifications

Specifications ItemSpecificationMaster cylinder • Type • I.D. mm(in) • Piston stroke mm(in) • Fluid level switch ?Fixed type 23.81 mm (0.937 in)45 ± 1 mm (1.7 ...

See also:

Closing the hood
1. Before closing the hood, check the following: All filler caps in engine compartment must be correctly installed. Gloves, rags or any other combustible material must be removed from the engi ...

Wheel Repair procedures
Lug nut tightening sequence Tighten the hub nuts as follows. Tightening torque: 88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)     When using an impact gun, final tigh ...

Camshaft Repair procedures
Removal [RH] 1. Remove the RH bank timing chain. (Refer to Timing System - "Timing Chain") 2. Remove the RH exhaust CVVT oil control valve. (Refer to Fuel System - "CVVT Oil Control Valv ...