Hyundai Azera: Under Body Body Repair
Fifth generation HG (2011–2024) / Hyundai Azera 2011-2024 Service Manual / Body (Interior and Exterior) / Body Dimensions / Under Body Body Repair
Fifth generation HG (2011–2024) / Hyundai Azera 2011-2024 Service Manual / Body (Interior and Exterior) / Body Dimensions / Under Body Body Repair
| Projected Dimensions |
|
|
|
| Front side member tooling hole (O25) | Side cover mounting hole (O9) | Side cover mounting hole (O9) |
|
|
|
| Front subframe mounting bolt | Front subframe mounting hole (O18) | Front subframe mounting hole (O12) |
|
|
|
| Front side member tooling hole (O14.5) | Center floor side member extension tooling hole (O19.5) | Rear floor side member tooling hole (O8) |
|
|
|
| Rear trailing arm mounting hole (O18) | Rear subframe mounting hole (O17) | Rear subframe mounting hole (O16) |
|
|
|
| Fuel filler-neck bracket mounting hole (O8) | Fuel filler-neck bracket mounting hole (O8) | Rear floor side member tooling hole (O10) |
| ||
| Rear floor side member tooling hole (O20) |
| Actual Measurement Dimensions |
|
|
|
| Front side member tooling hole (O25) | Side cover mounting hole (O9) | Side cover mounting hole (O9) |
|
|
|
| Front subframe mounting bolt | Front subframe mounting hole (O18) | Front subframe mounting hole (O12) |
|
|
|
| Front side member tooling hole (O14.5) | Center floor side member extension tooling hole (O19.5) | Rear floor side member tooling hole (O8) |
|
|
|
| Rear trailing arm mounting hole (O18) | Rear subframe mounting hole (O17) | Rear subframe mounting hole (O16) |
|
|
|
| Fuel filler-neck bracket mounting hole (O8) | Fuel filler-neck bracket mounting hole (O8) | Rear floor side member tooling hole (O10) |
| ||
| Rear floor side member tooling hole (O20) |
Rear Body Body Repair
Roof panel rear cornerSide outer panel rear cornerRear package tray trim mounting hole (O12) Side outer panel rear cornerRear combination lamp mounting hole(8.5X8.5) Rear bumper mounting hole (14X ...
Fender
...
See also:
Rocking the vehicle
If it is necessary to rock the vehicle to free it from snow, sand, or mud, first
turn the steering wheel right and left to clear the area around your front wheels.
Then, shift back and forth between ...
Tire rotation
To equalize tread wear, it is recommended that the tires be rotated every 7,500
miles (12,000 km) or sooner if irregular wear develops. During rotation, check the
tires for correct balance.
When ro ...
Vapor hose and fuel filler cap
The vapor hose and fuel filler cap should be inspected at those intervals specified
in the maintenance schedule. Make sure that a new vapor hose or fuel filler cap
is correctly replaced. ...
Categories
Hyundai Azera Manuals
© 2011-2024 Copyright www.hgmanual.com