Hyundai Azera: Hood
- Repair procedures
- Hood Assembly Components and Components Location
- Hood Assembly Repair procedures
- Hood Insulator Pad Repair procedures
- Hood Lift Repair procedures
- Hood Seal Weatherstrip Repair procedures
- Hood Weatherstrip Repair procedures
- Hood Latch Release Handle Components and Components Location
- Hood Latch Release Handle Repair procedures
- Hood Latch Components and Components Location
- Hood Latch Repair procedures
Repair procedures
Replacement
•
Be careful not to damage the fender and body.
•
When removing the clips, use a clip remover.
1.
Remove the head lamps.
(Refer to Body Electrica ...
Repair procedures
Adjustment
1.
After loosening the hinge (A) mounting bolt, adjust the hood (B) by moving it up or down, or right or left.
2.
Adjust the hood height by turning the hood overslam bumpers (C).
...
See also:
Side impact air bag
Your vehicle is equipped with a side impact air bag in each front and outboard
rear seat. The purpose of the air bag is to provide occupants with additional protection
than that offered by the sea ...
Turn Signal Lamp Repair procedures
Removal
Door mirror turn signal lamp
1.
Disconnect the negative (-) battey terminal.
2.
Remove the mirror (A).
3.
Remove the outside mirror cover (A).
4.
Remove the lower cover (A) of ...
Power windows
The ignition switch must be in the ON position for power windows to operate.
Each door has a power window switch that controls the door's window. The driver’s
door has a master power window swit ...
Categories
Hyundai Azera Manuals
© 2011-2024 Copyright www.hgmanual.com