Hyundai Azera: Hood Assembly Components and Components Location

Repair procedures

Adjustment 1. After loosening the hinge (A) mounting bolt, adjust the hood (B) by moving it up or down, or right or left. 2. Adjust the hood height by turning the hood overslam bumpers (C). ...

Hood Assembly Repair procedures

Replacement     • When removing and installing the hood, an assistant is necessary. • Be careful not to damage the hood and body. • When removing the clips, use a c ...

See also:

Troubleshooting
Troubleshooting SymptomSuspected areaRepairmentPressing power switch does not turn on systemAVN head unit receiver power source circuitR-2AVN monitorR-15Panel switch does not functionSteering pad ...

Rain Sensor Description and Operation
Description The Rain sensing windshield wiper system is a wiper system that, in addition to providing normal wiper functions off, mist, manual low speed, manual high speed, and wash, provides a ...

Water pump Troubleshooting
Troubleshooting SymptomsPossible CausesRemedyCoolant leakage • From the bleed hole of the water pump Visually check • Check leaks after about ten-minute warming up. • If coolant st ...