Replacement |
|
1. |
Using a screwdriver, lift the socket clips (A) up slightly on both ends of the lifter (B). |
2. |
After loosening the hood hinge (A) mounting bolts, remove the hood panel (B).
|
3. |
Installation is the reverse of removal.
|
Inhibitor Switch Schematic Diagrams
Circuit Diagram
...
Sunvisor
Use the sunvisor to shield direct light through the front or side windows. To
use a sunvisor, pull it downward. To use a sunvisor for a side window, pull it downward,
unsnap it from the bracket ...
Exhaust Manifold Repair procedures
Removal and Installation
[LH]
1.
Disconnect the LH front and rear heated oxygen sensor (HO2S) connector.
(Refer to Fuel System - "Heated Oxygen Sensor (HO2S)")
2.
Remove the front muffler ...