Hyundai Azera: Trunk Lid Assembly Repair procedures

Fifth generation HG (2011–2024) / Hyundai Azera 2011-2024 Service Manual / Body (Interior and Exterior) / Trunk Lid / Trunk Lid Assembly Repair procedures

Replacement

•	When removing and installing the trunk lid, an assistant is necessary.

•	Wear gloves to protect hands from injury.

1.	After loosening the mounting screws, then remove the trunk inside handle (A).

2.	Detach the clips, then remove the trunk lid trim (A).

3.	Detach the clips, then remove the trunk lid side cover (A).

4.	Disconnect wiring (B) and connectors.

5.

After loosening the mounting bolts, then remove the trunk lid (A).

Tightening torque :

6.9~8.8 N.m (0.7~0.9 kgf.m, 5.1~6.5 lb-ft)

6.

Installation is the reverse of removal.

•	Replace any damaged clips.

Trunk Lid Assembly Components and Components Location

Component Location 1. Trunk lid assembly ...

Trunk Lid Trim Components and Components Location

Component Location 1. Trunk lid trim ...

See also:

Rear Body Body Repair
Roof panel rear cornerSide outer panel rear cornerRear package tray trim mounting hole (O12) Side outer panel rear cornerRear combination lamp mounting hole(8.5X8.5) Rear bumper mounting hole (14X ...

Front Door Latch Repair procedures
Replacement 1. Remove the front door module. (Refer to Front Door - "Front Door Module") 2. Disconnect the connector (A) and front door latch wiring harness. 3. Remove the front door latc ...

Start/Stop Button Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the AVN head unit. (Refer to AVN System - "AVN Head Unit") 3. Disconnect the start/stop button connector. Push the hook ...

Categories

Hyundai Azera Manuals

© 2011-2024 Copyright www.hgmanual.com