Replacement |
1. |
Remove the rear door trim.
(Refer to Rear Door - "Rear Door Trim") |
2. |
After loosening the mounting screws, then remove the rear door frame rear garnish (A). |
3. |
Loosen the rear door channel mounting bolts and nut. |
4. |
Remove the rear door window glass mounting hole plug (B).
|
5. |
Carefully adjust the rear door window glass (A) until you can
see the bolts, then loosen them. Separate the glass from the glass run
and carefully pull the glass out through the window slot.
|
6. |
Installation is the reverse of removal.
|
Console Armrest Repair procedures
Replacement
•
When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply protective tape around the related parts, to
prevent damage.
•
Take ...
Main Crash Pad Assembly Components and Components Location
Component Location
1. Main crash pad assembly
...
26 Brake Control Solenoid Valve(26/B_VFS) Schematic Diagrams
Circuit Diagram
...