Replacement |
1. |
Remove the rear door trim.
(Refer to Rear Door - "Rear Door Trim") |
2. |
Remove the hole plug (B). |
3. |
After loosening the mounting bolt, then remove the rear door outside handle cover (A).
|
4. |
Remove the rear door outside handle (A) by sliding it rearward. |
5. |
Installation is the reverse of removal.
|
Pairing through [PHONE] Setup
Press the key
Select [Phone]
Select [Pair Phone]
Select
TUNE knob
1.The following steps are the same as those described in the section "When No
Devices have been Paired&qu ...
Water Jacket Seperator Components and Components Location
Components
1. Water jacket separator
...
BJ Boot Repair procedures
Replacement
1.
Remove the front driveshaft.
(Refer to Driveshaft Assembly - “Front Driveshaft”)
2.
Remove the TJ joint assembly.
(Refer to Driveshaft Assembly - “TJ Joint”)
3.
Remove ...