Hyundai Azera: Waist Line Molding Repair procedures
Fifth generation HG (2011–2024) / Hyundai Azera 2011-2024 Service Manual / Body (Interior and Exterior) / Body Side Molding / Waist Line Molding Repair procedures
Fifth generation HG (2011–2024) / Hyundai Azera 2011-2024 Service Manual / Body (Interior and Exterior) / Body Side Molding / Waist Line Molding Repair procedures
| Replacement |
|
| 1. |
Using a screwdriver or remover, remove the front waist line molding (A). |
| 2. |
Using a screwdriver or remover, remove the rear waist line molding (B). |
| 3. |
Installation is the reverse of removal.
|
Rear Mud Guard Repair procedures
Replacement
•
When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply protective tape around the related parts, to
prevent damage.
•
Put ...
Side Sill Molding Repair procedures
Replacement
•
When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply protective tape around the related parts, to
prevent damage.
•
Put ...
See also:
Windshield Deicer Repair procedures
Inspection
1.
Remove the cowl top cover.
(Refer to Windshield Wiper/Washer - "Front Wiper Motor")
2.
Disconnect the windshield deicer connector from the wiper motor linkage.
3.
Check for ...
LCD display
The Trip computer, User settings, Maintenance system, Warnings, etc. are displayed
on the LCD display. To change between groups, press the DISP button.
To change between modes in groups, press t ...
Rear seat
Headrest
The rear seat is equipped with headrests for the occupant's safety and comfort.
The headrest not only provides comfort for passengers, but also helps to protect
the head and neck i ...
Categories
Hyundai Azera Manuals
© 2011-2024 Copyright www.hgmanual.com