Replacement |
|
1. |
Using a screwdriver or remover, remove the front frame inner cover (A). |
2. |
Disconnect the outside rear view mirror connector (A). |
3. |
After loosening the mounting nuts, then remove the outside rear view mirror (B).
|
4. |
Installation is the reverse of removal.
|
Heater & A/C Control Unit(Full Automatic) Components and Components Location
Components
Connector pin function
ConnectorPIN NoFunctionConnectorPIN NoFunctionConnector (A)1Tail (+)Connector (A)27Evaporator Sensor (+)2Sensor REF (+5V)28-3CAN HIGH29Incar Sensor (+)4CAN LOW30D ...
Telematics Unit (TMU) Repair procedures
Removal
AVN Head Unit
•
Take care not to scratch the center fascia panel and related parts.
•
Eject all the disc before removing the AVN head unit to prevent damagin ...
Searching Categories
Select the category by using the
, keys and press the
key to select.
Channels for the selected category are played. ...