Replacement |
|
1. |
Using a screwdriver or remover, remove the center facia side garnish (A). |
2. |
Remove the gear boots (B) and gear knob (A). |
3. |
Using a screwdriver or remover, remove the console upper tray complete (A). |
4. |
Disconnect the connectors (A). |
5. |
Remove the console tray (A). |
6. |
Remove the console tray met (A). |
7. |
After loosening the mounting screws and bolts, then remove the console rear complete assembly (A). |
8. |
Disconnect the connector (A). |
9. |
Using a screwdriver or remover, remove the console extension cover (A). |
10. |
After loosening the mounting screws, then remove the console front complete assembly (A).
|
11. |
Disconnect the connectors (A). |
12. |
Installation is the reverse of removal.
|
Input Speed Sensor Schematic Diagrams
Circuit Diagram
...
Engine Cover Components and Components Location
Components Location
1. Engine cover
...
Air Ventilation Seat Description and Operation
Description
Using the blows power of FAN on seat, remove the moisture, sweat and warmth from occupants and surface of seats.
It inhales the indoor air through the blower installed at the
seat cu ...