Hyundai Azera: Rear Console Cover Repair procedures

Fifth generation HG (2011–2024) / Hyundai Azera 2011-2024 Service Manual / Body (Interior and Exterior) / Floor Console / Rear Console Cover Repair procedures

Replacement

•	When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.

•	Take care not to scratch the body surface.

•	Put on gloves to protect your hands.

1.	Remove the console rear complete assembly. (Refer to Floor Console - " Floor Console Assembly")

2.	After loosening the mounting screws, then remove the rear console cover (A).

3.	Disconnect the connector (A).

4.

Installation is the reverse of removal.

•	Make sure the connector are connected in properly.

•	Replace any damage clips.

Rear Console Cover Components and Components Location

Component Location 1. Rear console cover ...

Console Armrest Components and Components Location

Component Location 1. Console armrest ...

See also:

Radiator Repair procedures
Removal and Installation 1. Remove the radiator upper hose and lower hose. (Refer to Cooling System - "Radiator Hose") 2. Remove the cooling fan assembly. (Refer to Cooling System - "Cooli ...

Rear Seat Cushion Cover Repair procedures
Replacement • Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface. • Take care not to bend or scratch the trim and pan ...

Roof Side Molding Repair procedures
Replacement [General Type] • When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent dama ...

Categories

Hyundai Azera Manuals

© 2011-2024 Copyright www.hgmanual.com