Hyundai Azera: Crash Pad Lower Panel Repair procedures

Fifth generation HG (2011–2024) / Hyundai Azera 2011-2024 Service Manual / Body (Interior and Exterior) / Crash Pad / Crash Pad Lower Panel Repair procedures

Replacement

•	When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.

•	Take care not to scratch the body surface.

•	Put on gloves to protect your hands.

1.	Using a screwdriver or remover, remove the crash pad side cover (A).

2.	Using a screwdriver or remover, remove the fuse box cover (A).

3.	After loosening the mounting screws, then remove the crash pad lower panel (A).

4.	Disconnect the diagnosis connector (A) and connector (B).

5.

Installation is the reverse of removal.

•	Make sure the connector are connected in properly.

•	Replace any damaged clips.

Crash Pad Lower Panel Components and Components Location

Component Location 1. Crash pad lower panel ...

Glove Box Housing Components and Components Location

Component Location 1. Glove box housing ...

See also:

Hood Assembly Repair procedures
Replacement • When removing and installing the hood, an assistant is necessary. • Be careful not to damage the hood and body. • When removing the clips, use a c ...

Schematic Diagrams
System Block Diagram Component Parts And Function Outline Component partFunctionVehicle-speed sensorConverts vehicle speed to pulse.ECMReceives signals from sensor and control switches.Cruise cont ...

Air Ventilation Seat Description and Operation
Description Using the blows power of FAN on seat, remove the moisture, sweat and warmth from occupants and surface of seats. It inhales the indoor air through the blower installed at the seat cu ...

Categories

Hyundai Azera Manuals

© 2011-2024 Copyright www.hgmanual.com