Replacement |
|
1. |
Using a screwdriver or remover, remove the crash pad side cover (A). |
2. |
Disconnect the stopper (B) from the glove box (A). |
3. |
Disconnect the air damper (A) from the glove box (B). |
4. |
Disconnect the pin (A) and then remove the glove box (B). |
5. |
After loosening the mounting screws, then remove the passenger's under cover (A). |
6. |
Disconnect the connector (A). |
7. |
After loosening the mounting screws, then remove the glove box housing (A). |
8. |
Disconnect the connectors (A). |
9. |
Installation is the reverse of removal.
|
Schematic Diagrams
Circuit Diagram (1)
Circuit Diagram (2)
Circuit Diagram (3)
SRSCM Connector terminal
Pin Function (Connector A)Pin Function (Connector B)1Ignition1Seat belt pretensioner [Driver] Hig ...
AVN Remote Controller Schematic Diagrams
Circuit Diagram
...
Components and Components Location
Component Location
1. Fuel filler door open switch2. Fuel filler door release actuator
...