Hyundai Azera: Steering Column Shroud Panel Repair procedures

Fifth generation HG (2011–2024) / Hyundai Azera 2011-2024 Service Manual / Body (Interior and Exterior) / Crash Pad / Steering Column Shroud Panel Repair procedures

Replacement

•	When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.

•	Take care not to scratch the body surface.

•	Put on gloves to protect your hands.

1.	After loosening the mounting screws, then remove the steering column shroud panel (A).

2.	Disconnect the connector (A).

3.

Installation is the reverse of removal.

•	Make sure the connector are connected in properly.

•	Replace any damaged clips.

Steering Column Shroud Panel Components and Components Location

Component Location 1. Steering column shroud panel ...

Crash Pad Side Cover Components and Components Location

Component Location [LH] 1. Crash pad side cover [LH] [RH] 1. Crash pad side cover [RH] ...

See also:

Specifications
Specification Ignition System ItemsSpecificationIgnition coilPrimary resistance0.75? ± 15 %Secondary resistance5.9k? ± 15 %Spark plugsTypeSILZKR7B11Gap1.0 ~ 1.1mm (0.0394 ~ 0.0433in.) Starting ...

Parking Brake Assembly Repair procedures
Removal Parking Brake Shoe 1. Raise the vehicle, and make sure it is securely supported. 2. Remove the rear tire and wheel. 3. Remove the rear brake caliper and Rear disc brake. (Refer ...

Trunk Lid Weatherstrip Repair procedures
Replacement 1. Remove the trunk lid weatherstrip (A). • Do not apply sealant to the body. 2. Installation is the reverse of removal. • ...

Categories

Hyundai Azera Manuals

© 2011-2024 Copyright www.hgmanual.com