Replacement |
|
1. |
Remove the main crash pad assembly.
(Refer to Crash Pad - "Main Crash Pad Assembly") |
2. |
Remove the cowl top cover.
(Refer to "Cowl Top Cover") |
3. |
Disconnect the blower unit connectors. |
4. |
Disconnect the multi box connectors (A).
[Driver's]
[Passenger's] |
5. |
Disconnect the passenger compartment junction box connectors. |
6. |
Disconnect the airbag control module (SRSCM) connectors (A). |
7. |
Disconnect the connector (A) and the mounting clips in the front pillar.
[Driver's]
[Passenger's] |
8. |
After loosening the mounting bolts and nuts, then remove the cowl cross bar assembly (A). |
9. |
Installation is the reverse of removal.
|
Front Bumper Cover Repair procedures
Replacement
•
Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.
•
Take care not to bend or scratch the trim and pan ...
Line Pressure Control Solenoid Valve Description and Operation
Description
Line Pressure(L/P) control solenoid valve is attached to the
valve body. This variable force solenoid valve directly controls the
hydraulic pressure inside the line pressure. ...
Water pump Troubleshooting
Troubleshooting
SymptomsPossible CausesRemedyCoolant leakage
•
From the bleed hole of the water pump
Visually check
•
Check leaks after about ten-minute warming up.
•
If coolant st ...