Replacement |
|
1. |
Loosen the mounting screws, then remove the sunvisor (A) and retainer (B). |
2. |
Disconnect the connector (A). |
3. |
Installation is the reverse of removal.
|
Output Speed Sensor Troubleshooting
Signal Waveform
Fig 1) Input/Output speed sensor at low speed
Fig 2) Input/Output speed sensor at high speed ...
Rear Seat Belt Buckle Repair procedures
Replacement
1.
Remove the rear seat cushion assembly.
(Refer to Rear Seat - "Rear Seat Assembly")
2.
Loosen the mounting bolt, and then remove the rear seat belt buckle (A).
[LH]
Tighten ...
Lane Departure Warning System (LDWS) Unit Components and Components Location
Components
...