Replacement |
|
1. |
Remove the front seat assembly.
(Refer to Front Seat - "Front Seat Assembly") |
2. |
Remove the rear seat assembly.
(Refer to Rear Seat - "Rear Seat Assembly") |
3. |
Remove the console rear complete & console front complete assembly.
(Refer to Floor Console - "Floor Console Assembly") |
4. |
Remove the front pillar trim.
(Refer to Interior Trim - "Front Pillar Trim") |
5. |
Remove the center pillar upper trim.
(Refer to Interior Trim - "Center Pillar Trim") |
6. |
Remove the rear pillar trim.
(Refer to Interior Trim - "Rear Pillar Trim") |
7. |
Remove the sunvisor and retainer.
(Refer to Roof Trim - "Sunvisor") |
8. |
Remove the assist handle.
(Refer to Roof Trim - "Assist Handle") |
9. |
Remove the overhead console lamp.
|
10. |
Remove the room lamp.
|
11. |
Remove the ECM mirror cover (A). |
12. |
Disconnect the ECM mirror connector (B). |
13. |
Remove the rain sensor cover (A). |
14. |
Disconnect the rain sensor connector (B). |
15. |
Disconnect the roof trim main connectors (A). |
16. |
Detach the clips, then remove the roof trim assembly (A). |
17. |
Remove the vanity lamp.
|
18. |
Remove the hands free mic.
|
19. |
Installation is the reverse of removal.
|
Front Seat Back Cover Components and Components Location
Component Location
1. Front seat back cover
...
Glove Box Housing Repair procedures
Replacement
•
When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply protective tape around the related parts, to
prevent damage.
•
Take ...