Hyundai Azera: Rear Pillar Trim Repair procedures

Fifth generation HG (2011–2024) / Hyundai Azera 2011-2024 Service Manual / Body (Interior and Exterior) / Interior Trim / Rear Pillar Trim Repair procedures

Replacement

•	Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.

•	Take care not to bend or scratch the trim and panels.

•	Put on gloves to protect your hands.

1.	Using a screwdriver or remover, remove the rear pillar trim (A).

2.

Installation is the reverse of removal.

•	Replace any damaged clips.

Rear Pillar Trim Components and Components Location

Component Location 1. Rear pillar trim ...

Rear Package Tray Trim Components and Components Location

Component Location 1. Rear package tray trim ...

See also:

Reset items
Items should be reset after the battery has been discharged or the battery has been disconnected. Auto up/down window (See section 4) Sunroof (See section 4) Driver position memory system (Se ...

Camshaft Repair procedures
Removal [RH] 1. Remove the RH bank timing chain. (Refer to Timing System - "Timing Chain") 2. Remove the RH exhaust CVVT oil control valve. (Refer to Fuel System - "CVVT Oil Control Valv ...

Brake Switch Repair procedures
Removal 1. Turn ignition switch OFF and disconnect the negative (-) battery cable. 2. Remove the lower crash pad. (Refer to the Body - "Crash Pad") 3. Disconnect the stop lamp switch con ...

Categories

Hyundai Azera Manuals

© 2011-2024 Copyright www.hgmanual.com