Hyundai Azera: Rear Bumper Cover Repair procedures

Fifth generation HG (2011–2024) / Hyundai Azera 2011-2024 Service Manual / Body (Interior and Exterior) / Rear Bumper / Rear Bumper Cover Repair procedures

Replacement

•	Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.

•	Take care not to bend or scratch the trim and panels.

•	Put on gloves to protect your hands.

1.	Remove the luggage side trim. (Refer to "Trunk Trim")

2.	Disconnect the rear bumper main connector (A).

3.	Disconnect the connector (B), and then loosen the rear combination lamp mounting nuts.

4.	Remove the rear combination lamp (A).

5.	Remove the rear bumper lower mounting clips.

6.	Loosen the mounting bolts.

7.	After loosening the rear bumper side's mounting screws, then disconnect the side's.

8.	After loosening the mounting screw and clips, then remove the rear bumper cover (A).

9.

Installation is the reverse of removal.

•	Replace any damaged clips.

•	Make sure the connector is plugged in properly.

Rear Bumper Cover Components and Components Location

Component Location 1. Rear Bumper Cover ...

Front Seat

...

See also:

Starter Repair procedures
Removal and Installation 1. Disconnect the battery negative terminal. 2. Remove the engine room under cover. 3. Remove the starter cover (A). Tightening torque : Bolts: 8.8 ~ 13.7 N. ...

Using SEEK
Press the keys to play the previous/next channel. ❈ If the “Category” icon is displayed, channels are changed within the current category. ...

Curtain air bag
Curtain air bags are located along both sides of the roof rails above the front and rear doors. They are designed to help protect the heads of the front seat occupants and the rear outboard seat ...

Categories

Hyundai Azera Manuals

© 2011-2024 Copyright www.hgmanual.com