Hyundai Equus Manuals

Hyundai Azera: Front Seat Assembly Repair procedures - Front Seat - Body (Interior and Exterior) - Hyundai Azera 2011-2024 Service ManualHyundai Azera: Front Seat Assembly Repair procedures

Replacement
1.
Remove the front seat track mounting cover.
2.
After loosening the seat assembly mounting bolts, remove the front seat assembly (A).

Tightening torque :
49.0 ~ 63.7N.m (5.0 ~ 6.5kgf.m, 36.2~47.0lb-ft)

3.
Disconnect the seat buckle connector (A), seat warmer connector (B), SAB connector(C), PODS connector (D).
[Driver's]

[Passenger's]

4.
Installation is the reverse of removal.
   
SEAT MOUNTING BOLT INSTALLATION PROCEDURE
Set the seat into the most rearward position. Check that each slide is locked, and then tighten the front mounting bolt temporarily.
Set the seat into most forward position. Check that each slide is locked, and then Tighten the rear mounting bolt completely.
Set the seat into the most rearward position. Check the front mounting bolt completely.
Check that the seat operates to and fro smoothy and the locking portion locks properly.
Front Seat Assembly Components and Components Location
Component Location 1. Front seat assembly ...

Front Seat Shield Outer Cover Components and Components Location
Component Location 1. Front seat shield outer cover ...

See also:

TPMS Receiver Description and Operation
Operation 1. General Function A. Auto-locate/learn takes place only once per Ignition cycle. B. On successful completion, 4 road wheel sensor ID's, together with their respective road whee ...

Tire and loading information  label
The label located on the driver's door sill gives the original tire size, cold tire pressures recommended for your vehicle, the number of people that can be in your vehicle and vehicle capacity ...

TPMS Receiver Schematic Diagrams
Circuit Diagram Connector pin number Pin NO.DiscriptionRemark1IGN2CAN_Low3-4Battery5CAN_High6Ground ...

Categories

Hyundai Azera Manuals


© 2011-2024 Copyright www.hgmanual.com