Hyundai Azera: Front Seat Shield Inner Cover Repair procedures

Fifth generation HG (2011–2024) / Hyundai Azera 2011-2024 Service Manual / Body (Interior and Exterior) / Front Seat / Front Seat Shield Inner Cover Repair procedures

Replacement

•	Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.

•	Take care not to bend or scratch the trim and panels.

•	Put on gloves to protect your hands.

1.	Remove the front seat assembly. (Refer to Front Seat - "Front Seat Assembly")

2.	Using a screwdriver or remover, remove the front seat shield inner cover (A).

3.

Installation is the reverse of removal.

•	Replace any damaged clips.

Front Seat Shield Inner Cover Components and Components Location

Component Location 1. Front seat shield inner cover ...

Front Seat Back Cover Components and Components Location

Component Location 1. Front seat back cover ...

See also:

CVVT Oil Temperature Sensor (OTS) Specifications
Specification TemperatureResistance (k?)°C°F-40-4052.15-20-416.520326.020682.45401041.11601400.54801760.29 ...

Components and Components Location
Component Location 1. Driver power window switch2. Door lock switch3. IPM(Intelligent intergrated Platform Module)4. Front door lock actuator5. Rear door lock actuator6. Trunk lid open actuator7. ...

Heated Oxygen Sensor (HO2S) Repair procedures
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the HO2S connector. 3. Measure resistance between the HO2S terminals 3 and 4. 4. Check that the resistance is within the speci ...

Categories

Hyundai Azera Manuals

© 2011-2024 Copyright www.hgmanual.com