Replacement |
|
1. |
Remove the front seat assembly.
(Refer to Front Seat - "Front Seat Assembly") |
2. |
Remove the front seat shield outer cover.
(Refer to Front Seat - "Front Seat Shield Outer Cover") |
3. |
Push the lock pin (B), remove the front seat headrest (A). |
4. |
Remove the protector (A). |
5. |
Disconnect the front seat heater connector (A). |
6. |
Push the clips (B) from the front seat back board (A).
|
7. |
After loosening the mounting screws, then remove the air ventilation seat duct (A). |
8. |
Push the protecter (A) by the front seat back frame. |
9. |
Pull out the headrest guides (A) while pinching the end of the guides, and remove them. |
10. |
Remove the front seat back cover (A) from the front seat frame. |
11. |
After removing the velcro tape (A) on the front of seat back and remove the front seat back cover (B). |
12. |
Installation is the reverse of removal.
|
Engine Coolant Temperature Sensor (ECTS) Specifications
Specification
TemperatureResistance (k?)°C°F-40-4048.14-20-414.13 ~ 16.830325.7920682.31 ~ 2.59401041.15601400.59801760.32
...
Oil Cooler Repair procedures
Removal and Installation
1.
Remove the radiator upper hose and lower hose.
(Refer to Engine Mechanical System - "Radiator Hose")
2.
Remove the cooling fan assembly.
(Refer to Engine Mechani ...
Fuel Tank Pressure Sensor (FTPS) Schematic Diagrams
Circuit Diagram
...