Replacement |
1. |
After loosening the mounting bolts, then remove the rear seat cushion assembly (A).
|
2. |
Disconnect the rear seat cushion heater connector (A). |
3. |
After loosening the mounting bolts, then remove the rear seat back assembly (A).
|
4. |
Disconnect the rear seat back heater connector (A) and airbag connector (B).
[LH]
[RH] |
5. |
Installation is the reverse of removal.
|
Transaxle Control Module (TCM) Description and Operation
Description
Transaxle Control Module (TCM) is the automatic transaxle's
brain. The module receives and processes signals from various sensors
and implements a wide range of transaxle controls t ...
USB Mode Menu
If you press the key, you will
have access to the Repeat, Shuffle, List, Info and Copy features.
Repeat
Press the key
Select
Each time the button is pressed, the
feature changes in o ...
Anchor Pretensioner (APT) Repair procedures
Removal
1.
Disconnect the battery negative cable, and wait for at least three minutes before beginning work.
2.
To remove the seat belt anchor pretensioner (C), keep on
pushing the lock pi ...