Hyundai Azera: Rear Seat Back Cover Components and Components Location

Rear Seat Assembly Repair procedures

Replacement 1. After loosening the mounting bolts, then remove the rear seat cushion assembly (A). Tightening torque : 16.7 ~ 25.5N.m (1.7 ~ 2.6kgf.m, 12.3~18.8lb-ft) 2. Disconnect the r ...

Rear Seat Back Cover Repair procedures

Replacement     • Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface. • Take care not to bend or scratch the trim and pan ...

See also:

Immobilizer Control Unit Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the crash pad lower panel. (Refer to Body - "Crash Pad Lower Panel") 3. Disconnect the connector of the immobilizer unit ...

Floor Console Assembly Repair procedures
Replacement     • When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage. • Take ...

Knee Airbag (KAB) Module Repair procedures
Removal 1. Disconnect the battery negative cable and wait for at least three minutes before beginning work. 2. Remove the crash pad lower panel. (Refer to Body - "Crash pad lower panel") ...