Hyundai Azera: Rear Seat Cushion Cover Repair procedures

Fifth generation HG (2011–2024) / Hyundai Azera 2011-2024 Service Manual / Body (Interior and Exterior) / Rear Seat / Rear Seat Cushion Cover Repair procedures

Replacement

•	Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.

•	Take care not to bend or scratch the trim and panels.

•	Put on gloves to protect your hands.

1.	Remove the rear seat cushion assembly. (Refer to Rear Seat - "Rear Seat Assembly")

2.	Remove the hog-ring clips (A).

3.	After removing the velcro tape (A) and hog-ring clips (B) on the rear of seat cushion and remove the rear seat cushion cover (C).

4.

Installation is the reverse of removal.

•	To prevent wrinkles, make sure the material is stretched evenly over the cover (B) before securing the hog-ring clips (A).

•	Replace the hog-ring clips with new ones using special tool [C (09880-4F000)].

Rear Seat Cushion Cover Components and Components Location

Component Location 1. Rear seat cushion cover ...

Rear Back Armrest Components and Components Location

Component Location 1. Rear back armrest ...

See also:

General Information
General 1. Basically, all measurements in this manual are taken with a tracking gauge. 2. When a measuring tape is used, check to be sure there is no elongation, twisting or bending. 3. ...

Repair procedures
Inspection 1. After disconnecting the vapor hose from the PCV valve, remove the PCV valve. 2. Reconnect the PCV valve to the vapor hose. 3. Inspect the PCV vlave operation. (1) Run the ...

Cylinder Head Cover Repair procedures
Removal [LH] 1. Remove the Intake manifold. (Refer to Intake And Exhaust System - "Intake Manifold") 2. Remove the high pressure fuel pump. (Refer to Fuel System - "High Pressure Fuel Pu ...

Categories

Hyundai Azera Manuals

© 2011-2024 Copyright www.hgmanual.com