Hyundai Equus Manuals

Hyundai Azera: Front Seat Belt Pretensioner Repair procedures - Front Seat Belt - Body (Interior and Exterior) - Hyundai Azera 2011-2024 Service ManualHyundai Azera: Front Seat Belt Pretensioner Repair procedures

Replacement
   
When installing the belt, make sure not to damage the pretensioner.
1.
Remove the front seat assembly.
(Refer to Front Seat - "Front Seat Assembly")
2.
Remove the center pillar upper trim.
(Refer to Interior Trim - "Center Pillar Trim")
3.
After loosening the mounting bolt, then remove the front seat belt upper anchor (A).

Tightening torque :
39.2 ~ 53.9 N.m (4.0 ~ 5.5 kgf.m, 28.8 ~ 39.8 lb-ft)

4.
After disconnecting the pretensioner connector lock pin, remove the front seat belt pretensioner connector (A), loosen the mounting bolts, then remove the front seat belt pretensioner (B).

Tightening torque :
39.2 ~ 53.9 N.m (4.0 ~ 5.5 kgf.m, 28.8 ~ 39.8 lb-ft)

5.
Installation is the reverse of removal.
   
Replace any damaged clips.
Make sure the connector is plugged in properly.
Front Seat Belt Pretensioner Components and Components Location
Component Location 1. Front seat belt pretensioner ...

Height Adjust Components and Components Location
Component Location 1. Height adjust ...

See also:

Rear curtain (if equipped)
To fold the rear curtain, press the button. To unfold the rear curtain, press the button again. CAUTION Do not pull or fold the rear curtain by hand. It could cause motor failure. The rear ...

Highway driving
Tires Adjust the tire inflation pressures to specification. Low tire inflation pressures will result in overheating and possible failure of the tires. Avoid using worn or damaged tires which may re ...

Water Pipe Repair procedures
Removal and Installation 1. Remove the delivery pipe and injector assembly. (Refer to Fuel System - "Delivery Pipe") 2. Remove the water temperature control assembly. (Refer to Cooling Sys ...

Categories

Hyundai Azera Manuals


© 2011-2024 Copyright www.hgmanual.com