Hyundai Equus Manuals

Hyundai Azera: Height Adjust Repair procedures - Front Seat Belt - Body (Interior and Exterior) - Hyundai Azera 2011-2024 Service ManualHyundai Azera: Height Adjust Repair procedures

Replacement
1.
Remove the front seat belt upper anchor.
(Refer to Front Seat Belt - "Front Seat Belt Pretensioner")
2.
After loosening the bolts, then remove the height adjustor (A).

Tightening torque :
39.2 ~ 53.9 N.m (4.0 ~ 5.5kgf.m, 28.9 ~ 39.8 lb-ft)

3.
Installation is the reverse of removal.
   
Replace any damaged clips.
Make sure the connector is plugged in properly.
Height Adjust Components and Components Location
Component Location 1. Height adjust ...

Front Seat Belt Buckle Components and Components Location
Component Location 1. Front seat belt buckle ...

See also:

A/C Pressure Transducer Description and Operation
Description A/C pressure transducer convert the pressure value of high pressure line into voltage value after measure it. By converted voltage value, engine ECU controls cooling fan by operatin ...

Searching Radio Frequencies
Using Seek Press the key to play the previous/next frequency. Using TUNE Turn the , keys to select the frequency. FM : Increases/decreased by 200kHz AM : Increases/decreased by 10kHz ...

Passenger Airbag (PAB) Module Repair procedures
Removal 1. Disconnect the battery negative cable and wait for at least three minutes before beginning work. 2. Remove the glove box housing. (Refer to Body - "Glove box housing") 3. Remo ...

Categories

Hyundai Azera Manuals


© 2011-2024 Copyright www.hgmanual.com