Removal |
|
1. |
Disconnect the negative (-) battery terminal. |
2. |
Remove the crash pad center fascia panel (A). |
3. |
Remove the monitor (A) after loosening the mounting screws. |
4. |
Remove the AVN head unit (A) after loosening the mounting screws. |
5. |
Remove the AVN head unit connectors and cables.
|
1. |
Remove the center fascia panel.
(Refer to AVN System - "AVN Head Unit") |
2. |
Remove the monitor (A) after loosening the mounting screws. |
3. |
Remove the AVN monitor connectors and cables (A). |
Installation |
1. |
Connect the AVN head unit connectors and cable. |
2. |
Install the AVN head unit. |
3. |
Install the center fascia panel. |
4. |
Connet the battery (-) terminal.
|
1. |
Install the AVN monitor. |
2. |
Install the center fascia panel. |
Searching Categories
Select the category by using the
, keys and press the
key to select.
Channels for the selected category are played. ...
Closing the hood
1. Before closing the hood, check the following:
All filler caps in engine compartment must be correctly installed.
Gloves, rags or any other combustible material must be removed from the
engi ...
General Information
Basic Service Symbols
There are five primary symbols used to complement
illustrations. These symbols indicate the part to apply such materials
during service.
SymbolMeaningDo not reuse the p ...