Removal |
1. |
Remove the center fascia tray.
|
2. |
Disconnect the connectors (A) from center fascia tray. |
3. |
Remove the multimedia jack (B) from the console upper cover after releasing the fixed hooks (A). |
Installation |
1. |
Install the multimedia jack. |
2. |
Install the floor console upper cover. |
3. |
Install the shift lever knob.
|
Rear Lower Arm Repair procedures
Removal
1.
Remove the rear wheel & tire (A).
Tightening torque:
88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)
•
Be careful not to damage to the hub bolts ...
ICM (Integrated Circuit Module) Relay Box Repair procedures
Inspection
Two Turn Unlock Relay
Check for continuity between the terminals.
1.
There should be continuity between the No.18 and No.17
terminals when power and ground are connected to the No. ...
Passenger Airbag (PAB) Module Components and Components Location
Components
...