Smart Key |
1. |
Connect the DLC cable of GDS to the data link connector in driver side crash pad lower panel, turn the power on GDS. |
2. |
Select the vehicle model and then do "Smart key code saving". |
3. |
After selecting "Smart key teaching" menu, push "Enter" key, then the screen will be shown as below. |
4. |
After pushing the SSB with the teaching key, press "OK" button. |
5. |
Input the "Pin code" for first key teaching. |
6. |
Confirm the message "First key teaching completed". |
7. |
Input the "Pin code" for second key teaching. |
8. |
Confirm the message "Second key teaching completed". |
9. |
Then the screen will be shown as below when key teaching process is completed. |
Rear Door Outside Handle Repair procedures
Replacement
1.
Remove the rear door trim.
(Refer to Rear Door - "Rear Door Trim")
2.
Remove the hole plug (B).
3.
After loosening the mounting bolt, then remove the rear door outside hand ...
Call History
Press the key
Select [Call History]
A list of incoming, outgoing and missed calls is displayed.
Select the button to download the
call history.
1) Call History :
- Displays recent calls (ca ...
Spark Plug Components and Components Location
Components
1. Spark plug
...