Removal |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Remove the crash pad lower panel.
|
3. |
Remove the Reinforcing panel after loosening the mounting bolt and nut.
|
4. |
Disconnect the IPM connectors, loosening the nuts (4EA). |
5. |
Disconnect the rear connector, and then remove the IPM. |
Installation |
1. |
Install the IPM. |
2. |
Install the reinforcing panel. |
3. |
Install the crash pad lower panel. |
4. |
Disconnect the negative (-) battery terminal. |
IPM Diagnosis With GDS |
1. |
It will be able to diagnose defects of IPM with GDS quickly.
GDS can operates actuator forcefully, input/output value monitoring and
self diagnosis. |
2. |
Select model and "IPM". |
3. |
Select the module to check. |
4. |
Select "Input/output monitoring", if you will check current
data of body network system. It provides input/output status of each
module. |
5. |
If you will check each module data operation forcefully, select "Actuation test". |
6. |
To check the DTC of the each module, select "DIAGNOSTIC TROUBLE CODES". |
7. |
If you want to change user option, select “user option”. |
Mode Control Actuator Repair procedures
Inspection
1.
Ignition "OFF”
2.
Disconnect the connector of mode control actuator.
3.
Verify that the mode control actuator operates to the defrost
mode when connecting 12V to the termin ...
Exhaust Manifold Repair procedures
Removal and Installation
[LH]
1.
Disconnect the LH front and rear heated oxygen sensor (HO2S) connector.
(Refer to Fuel System - "Heated Oxygen Sensor (HO2S)")
2.
Remove the front muffler ...
Exterior overview
1. Door handle switch (smart key)
2. Hood
3. Outside rearview mirror
4. Windows
5. Panorama sunroof
6. Removable towing hook
7. Wiper blade
8. Tires and wheels
9. Headlamp
10. Fog li ...