Inspection |
1. |
Disconnect the connectors for each motor.
A : Front height motor
B : Slide motor
C : Rear height motor
D : Recline motor
E : Lumbar support motor
F : Cushion extension motor |
2. |
With the battery connected directly to the motor terminals, check if the motors run smoothly. |
3. |
Reverse the connections and check that the motor turns in reverse. |
4. |
If there is an abnormality, replace the motors. |
Use approved window washer anti-freeze in system
To keep the water in the window washer system from freezing, add an approved
window washer anti-freeze solution in accordance with instructions on the container.Window
washer anti-freeze is availabl ...
Gasoline containing alcohol and methanol
Gasohol, a mixture of gasoline and ethanol (also known as grain alcohol), and
gasoline or gasohol containing methanol (also known as wood alcohol) are being marketed
along with or instead of leaded ...
Repair procedures
Inspection (With GDS)
1.
Check BCM input/output specification of multifunction switch
using the GDS. If the specification is abnormal, replace the lamp or
wiper switch.
2.
If diagnosis is ...