Inspection |
1. |
Open the junction box fuse cover. |
2. |
Insert the hand to the junction box fuse cover hole and remove the crash pad side switch assembly (A) by pushing it.
|
3. |
Disconnect the switch connector. |
4. |
Check for continuity between the terminal No.4 and No.5.
If there is no continuity, replace the fuel filler door open switch. |
Driver Airbag (DAB) Module and Clock Spring Components and Components Location
Components
1. Driver Airbag (DAB)2. Steering Wheel3. Clock Spring
...
Relay Box (Passenger Compartment) Description and Operation
Description
Auto cut system of dark current
1.
Description : It cuts automatically power to the load to reduce parastic current draw.
2.
IPM had 3 modes, "Normal Mode", "Sleep Mode", "Power ...
Hands Free Mic Repair procedures
Inspection
1.
Disconnect the negative(-) battery terminal.
2.
Remove the roof trim.
(Refer to Body - "Roof Trim Assembly")
3.
Remove the handsfree mic (A) after disconnect the connector f ...