Description |
1. |
Description : It cuts automatically power to the load to reduce parastic current draw. |
2. |
IPM had 3 modes, "Normal Mode", "Sleep Mode", "Power Off Mode". Auto cut of dark current practice in "Sleep Mode".
|
3. |
The explanation - The auto cut of dark current
|
4. |
Problem when fuse switch setting is wrong
: If a fuse switch is set to OFF(Before delivering to
customer) by a customer or technician and auto cut function of dark
current activates, below problems may happen.
*If mode switch OFF(before delivering to customer) is set, power of BCM, Digital clock and audio is shut off. |
Front Fog Lamps Repair procedures
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the front bumper.
(Refer to Body - "Front Bumper Cover")
3.
Disconnect the front fog lamp connector.
4.
Replace the ...
Injector Troubleshooting
Signal Waveform
...
Components and Components Location
Components Location
1. AVN (A/V & Navigation head unit)2. Midrange speaker3. External amplifier4. Glass antenna (Radio)5. Front door speaker6. Rear door speaker7. Subwoofer speaker8. Antenna ...