Inspection |
1. |
The DDM inputs can be checked using the GDS. |
2. |
To check the input value of door lock switch, select option "IPM". |
3. |
Select option "DDM (Driver Door Module)". |
4. |
Select option "Input/Output monitoring". |
5. |
To check the input value of door lock switch in force mode, select option "ACTUATION TEST". |
Removal |
1. |
Disconnect the negative(-) battery terminal. |
2. |
Remove the front door trim panel.
|
3. |
Disconnect the power window switch module connector (A) from the wiring harness. |
4. |
Remove the power window switch module (B) from the door trim after loosening the mounting screws. |
Installation |
1. |
Install the power window switch module. |
2. |
Install the door trim panel after reconnecting the relevant connectors
|
Searching Categories
Select the category by using the
, keys and press the
key to select.
Channels for the selected category are played. ...
Smart Cruise Control Switch Repair procedures
Removal and Installation
1.
Disconnect the negative battery cable.
2.
Disconnect the driver air bag module.
(Refer to Restraint - "Driver Airbag (DAB) Module and Clock Spring")
3.
Remove ...
Rear parking assist system OFF button
To turn off the rear parking assist system, push the button (the indicator light
will illuminate). ...