Inspection |
1. |
Remove the cowl top cover.
(Refer to Windshield Wiper/Washer - "Front Wiper Motor") |
2. |
Disconnect the windshield deicer connector from the wiper motor linkage. |
3. |
Check for continuity between the terminals of deicer lines. |
4. |
Turn the ignition switch ON and the windshield deicer switch
ON, then measure the voltage between the terminals of harness side
deicer connector.
|
Front Door Latch Components and Components Location
Component Location
1. Front door latch
...
Engine start / stop button
...
26 Brake Control Solenoid Valve(26/B_VFS) Repair procedures
Inspection
1.
Turn ignition switch OFF.
2.
Disconnect the solenoid valve connector.
3.
Measure resistance between sensor signal terminal and sensor ground terminal.
4.
Check that the ...