Inspection |
1. |
The rear glass defogger switch inputs can be checked using the GDS. |
2. |
To check the input value of rear glass defogger switch, select option "IPM". |
3. |
To consult the present input/output value of IPM, "Current
DATA". It provides information of IPM input/output conditions of rear
defogger relay. |
4. |
To check the input value of rear glass defogger switch in force mode, select option "Actuation Test". |
Removal |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Remove the center fascia panel.
|
3. |
Remove the heater control unit (A) after removing screws. |
Installation |
1. |
Install the heater control unit. |
2. |
Install the center fascia panel. |
Scheduled maintenance service
Follow Normal Maintenance Schedule if the vehicle is usually operated where none
of the following conditions apply. If any of the following conditions apply, follow
Maintenance Under Severe Usage Co ...
Components and Components Location
Components Location
1. AVN (A/V & Navigation head unit)2. Midrange speaker3. External amplifier4. Glass antenna (Radio)5. Front door speaker6. Rear door speaker7. Subwoofer speaker8. Antenna ...